BCNYARD■
+34 631 09 68 62WhatsAppTelegram
ESENRU

Blog

Radiators or underfloor heating in a renovation: compare the whole system

Compare floor build-up, insulation, heat source and room use before replacing radiators. The right system depends on the building and the alterations that are actually feasible.

Hallway · completed work · Eixample flat, Barcelona
Illustrative image; it does not document this solution being built on a project.

Emitters and heat source are different decisions

Hydronic underfloor heating and radiators deliver heat differently, but both belong to a complete system. Replacing an emitter alone does not establish a saving. The designer needs room heat demand, insulation, operating temperatures and controls. A useful comparison uses the same indoor conditions and clearly defines the construction work included in each option.

What to measure in the existing floor

Survey doors, balconies, stairs, furniture and flooring transitions before choosing a system. The required build-up depends on the selected product, not a generic thickness. Confirm insulation, substrate, loads and connections to untouched rooms. A drawn floor section can reveal conflicts before demolition or procurement, including doors that would otherwise need alteration.

When to retain or adapt radiators

Keeping radiators may limit disruption where flooring stays or the renovation is partial. This does not prove the existing units are suitable for a different heat source. Check output, condition, connections and zoning. Where heating is shared, establish which parts may be altered and coordinate the intervention before planning shutdowns or draining the system.

Daily use and floor finishes

Tell the designer when the home is occupied, which rooms are used and whether it is left empty for long periods. Response depends on construction and controls; do not assume instant warm-up without checking the product. For timber, stone or other finishes, obtain manufacturer compatibility, suitable fixing materials and a commissioning sequence agreed with the flooring contractor.

How to request comparable estimates

Separate the heat source, emitters, distribution, controls, removal, screeds, finishes, door alterations and testing. Identify excluded rooms and any connection work they require. Ask the designer to explain the room-by-room solution and supply drawings and commissioning settings. Compare that scope rather than the radiator purchase price against underfloor pipework alone.

Frequently asked questions

Can underfloor heating be installed in every apartment?

Check build-up, substrate, insulation, loads and compatibility with services and finishes. Feasibility depends on the particular system and building, not floor area alone.

Does a heat pump require removing every radiator?

That requires a design check. Room demand, operating temperatures and each emitter’s capacity must be assessed. Some may be retained or adapted; others may need replacement.

Sources

www.boe.es

www.codigotecnico.org

BCN YARD / Contact

Tell us what you have in mind.

Service area: Barcelona and the wider province.

  • Own crew and trusted subcontractors
  • We speak Russian and Spanish
  • Reply within an hour
  • Staged payments under contract
  1. 01Property
  2. 02Services
  3. 03Size and location
  4. 04Timing
  5. 05Contact
Property