
Inspect components separately
Separate carcasses, fronts, hinges, drawers, plinths, worktops and appliances. A good-looking front does not establish the condition of the cabinet interior or parts near water. Check deformation, joints, hardware and spare-part availability. Photograph and measure each unit. Distinguish components suitable for reuse, those needing repair and those requiring a different solution.
Check fit against the new layout
Draw existing units at their actual sizes against doors, windows, circulation routes and proposed appliances. Required fillers and finishing pieces can alter appearance and cost. A worktop cut for one arrangement may not suit another. Confirm cut-outs, supports and junctions before committing to keep a component solely because it is attractive or valuable.
Plan dismantling and storage
Agree who disconnects services, dismantles, labels, transports and protects each component. Number items in the inventory and retain associated fixings and hardware references. Arrange suitable dry storage for the materials. Where an item is fragile or difficult to remove, record that uncertainty and a fallback before the programme depends on recovering it intact.
Compare the complete cost
Include inspection, dismantling, storage, transport, repairs, fillers, service changes and refitting. Compare that scope with an equivalent new solution without assuming a percentage saving. Ask each supplier to explain which components and work they cover. Reusing a cabinet does not automatically renew warranty terms for its old parts or associated appliances.
Check after refitting
Check stability, alignment, door and drawer movement, service access and the condition of recovered components. Record changes from the inventory and keep the installed layout. If an appliance must be forced into place or necessary access becomes concealed, resolve the junction before use. Successful reuse requires a coordinated adaptation, not merely fitting old units into the room.
Frequently asked questions
Is reusing a kitchen always cheaper?
That cannot be assumed. Add dismantling, storage, repairs, adaptation and fitting, then compare with a new solution covering equivalent work.
Can the existing worktop be moved?
It depends on material, condition, cut-outs, support and the new layout. A professional should assess removal and adaptation and allow for a fallback if recovery intact is uncertain.